Home > Learning Center > Scuba Mask

Scuba Mask

There are several critical components to a successful scuba dive. The time must be right, the level of supply should be sufficient and by implication a well planned organization, and the accessories like the goggles and scuba mask must be airtight. There are a few different specifications for a good mask and a couple of them will be referenced here.

One good idea prior to using a goggle is to be sure that they do not fog up. Unnecessary fogging is the bane and frustration of any diver and a simple method can be used to overcome the potential risk of it. All one must do is spit into their goggles and rub is around with your thumb and some salt water, the saliva forms a barrier on the goggles and it will prevent fogging. There are some commercially synthesized variants, but with a method so simple, most lifelong divers simply use the spitting method to clear their scuba mask.

When considering production, most masks are comprised of only a couple different materials. The lens is a plastic composite that is at times multilayered to prevent leakages. The corresponding skirt or the actual portion of the scuba mask is made of either rubber or silicone. If proper care is taken, such as a fresh water wash and rub after every use, the mask could last for a number of years making it a wise investment.

 

Scuba Diving Equipment | Diving Equipment | Learning Center | Site Map | Links | Contact | Home

©